Each part sold individually, except for 50700 (hardware bag - sold as a package) and 50100 (repair kit -sold as a kit) 

 

 

  Code # 10000 - 4" Solarprene rubber strips sold by the linear foot

 

 

Code # 20100 - 1 - Header black ASA weather resistant polymer 13 1/2" long

 

 

Code #20500 - 1 -HEC black ASA weather resistant polymer 13 1/2" long

clips into system as a spacer, or can be used as a connector at the inlet and outlet of the system

 

 

Code # 20200 - 1- Clip black premium polycarbonate 2.25"X2.5"

custom designed to lock headers together

 

 

Code # 20300 - 1- Orange installation tool

the installation tool must be installed in the clip gap before the headers are pushed together.

To push headers together, or to pull them apart, this tool MUST be used

 

 

Code # 30100 - 1 - Black O ring 3mm X 42mm

 

 

Code # 40100- 1- Black long strapping 51"  X .75" 

cross strapping goes across the panels on the roof 

 

 

Code # 40200 - 1-Black top strapping  12" X .75"

attaches headers to the roof

 

 

Code # 50700- 1- Hardware Kit

contains: 2 top straps, 3 long straps, 8 O rings, 8 clip, 8 lag bolts

necessary to attach the panels to the roof

 

 

Code # 90200 -1- Roof cement 37-GP-5, Black oil-based roof caulking 250 gm cartridge

apply generous amount at each penetration location

 

 

Code # 90300 -1- O-Ring lubricant, white lithium grease 3/8 oz tube

 

 

Code # 90400-1- Lag Bolt  carbon steel with zinc plating 3/8" head, length 1.5"

 

 

Code # 70100 -1-End Cap PVC/ABS  1.5"

installed at the opposite corner of the solar panel system to allow for proper drainage

 

 

Code # 80400 Water Sensor 10K

installed on feed line to measure temperature of cool water going to the roof

 

 

Code #80401  Roof Sensor 10K

installed on the roof to measure the temperature 

 

 

Code # 50100 Repair Kit

contains: 2 headers, 2 clips, 2 O rings, 1 install tool, 2 instruction sheets, 12 splicers, 1 piece rubber